لغة

تغيير اللغة
بيتمنتجاتآلات التعبئة والتغليف بالبثورRoller-type Alu/PVC Blister Packing Machine DPH-260
  • Roller-type AluPVC Blister Packing Machine DPH-260

آلات التعبئة والتغليف بالبثور

Roller-type Alu/PVC Blister Packing Machine DPH-260

Roller-type blister packing machine seals and packages blisters by aluminum/plastic (PTP/PVC) for medicines (tablets or capsules), food, medical devices, health products, electronic components and other similar products. Positive pressure forming and rotary sealing produces flat and neat blisters with full and smooth pockets. The speed of 80 punches per minute (3 blisters/punch and 240 blisters/minute) creates roughly double output of other ordinary blister machines. The machine integrates the advantages of both plate-type and roller-type blister machines, configured with a special tablet feeder (or an automatic capsule U-turn reorientation device), featuring high punch frequency, low energy consumption, accurate and stable process, easy format changeover and high yield, especially adaptive to a wide range of drugs and blisters, thus resulting in great improvement of production efficiency. The design is quite reasonable, using frequency control and automatic control technology integrating machine, electricity, light and air. The machine adopts modular design and complete GMP-compliant system, .

يشارك:

تغيير سريع
احتياطات شاملة
التشغيل البديهي
التكامل الوثيق

نوع المنتج

  • مقدمة

  • التعليمات

  • فيديو

Features：

1. Equipped with a 360° rotary high-speed vacuum suction plate rejecting and conveying device, a shared decelerator for both rejection transmission and stroke transmission ensures synchronization of rejection speed and stroke speed.

2. Water cooling device for the roller die sustains the continuous use of the heat-sealing roller die in the production process, avoids the impact on the blister by the high temperature of the roller, and effectively eliminates aluminum foil wrinkling caused by the heat radiation.

3. The main drive connection by synchro-pulley and synchro-belt avoids vibration caused by the transmission under high-speed operation and reduces the noise of the equipment.

4. The process of forming, heat sealing, batch coding, punching and cutting each controlled by separate decelerators, driven by shafts and connecting pendulum rods, allows faster speed, higher level of durability and lower noise

حدود

نموذجDPH-260
Punching speed（standard blister 120mm×60mm×2）40-100 cuts/min
الحد الأقصى للإخراج12000 blisters/hour
مدى الضربات40-240 mm
أقصى مساحة تشكيل240×260mm
أقصى عمق للتشكيل12mm
Power of forming and heating station4KW（×2）
قوة الختم الحراري3KW/1.5KW(×2)
Servo motor power0.75KW×3
قوة المحرك الرئيسي3 كيلوواط
مصدر الطاقة والطاقة الكلية3-phase 4-wire 380V 50HZ（220V 60HZ）20KW
تدفق مضخة الهواء≥0.6m3/دقيقة
Packaging materialsبولي كلوريد الفينيل0.25×260mm
بروتوكول نقل الملفات (PTP)0.02×260mm
ألو0.12×260mm
الأبعاد (الطول × العرض × الارتفاع)6210×1100×1600mm
Packaging dimensions (L×W×H)6600×1200×2000mm
وزن4100Kg

Applicable packaging materials

مواد التعبئة والتغليفPVC/PVDC/PET/PE/ACLAK(PTP) Lid materialPA/AL/VC
Thickness0.2-0.5mm（general 0.25-0.3）0.02-0.025mm0.09-0.15mm
Reel inner diameter70-76mm70-76mm70-76mm
Reel outer diameter300mm220mm250mm
image

العلامات:

المنتجات ذات الصلة

قد يعجبك أيضاً