بيتمنتجاتصناع الكرتونعلبة أقنعة الوجه الاحترافية ZHJ-100B
  • علبة أقنعة الوجه ZHJ-100B

صناع الكرتون

علبة أقنعة الوجه الاحترافية ZHJ-100B

Intermittent Cartoner ZHJ-100B features multiple servo feeding, integrating photoelectric, pneumatic and mechanic properties, applicable to packing tablets, facial masks (linings), drug bottles, lotions, cosmetics and other similar products into cartons. Out-of-stock and short-of-stock alerts in the carton and lining magazines where buzzer alarms when the inventory falls to the lower limit. Both magazines can hoard up to 600 cartons and lining cardboards. The timing belt for feeding is equipped with detection device. With a clip-type carton placing mechanism, cartons won’t be rubbed and scratched. The stable output of this machine is 60 cartons/minute, and the maximum can reach 80 carton/minute. It can also be integrated with other modules such as bundling machine, cellophane wrapper or case packer to achieve streamline production.  

تغيير سريع
احتياطات شاملة
التشغيل البديهي
التكامل الوثيق
  • مقدمة

  • التعليمات

  • فيديو

سمات

1.With PLC+HMI and top branded servo motors, the machine features easy format changeover, high speed, stable performance, and accurate motion. It is intuitive to operate even by an inexperienced operator.

2.The cartoning speed and output counts will be shown on the touch screen.

3. Automatic detection system in place, the machine automatically detects and locates the shutdown for failures such as missed product, misplaced product, and unopened cartons.

4. Malfunctions alarm and display, with troubleshooting on the touch screen.

حدود

نموذجZHJ-100
الناتج40~80 cartons/min
الأبعاد (الطول × العرض × الارتفاع)2920mm×1140mm×1880mmlining mechanism included: 5580mm×1440mm×1880mm
Carton size(L×W×H)(80-200)×(30-120)×(25-100)mm
Carton quality300~350g/m² white cardboard
مزود الطاقة380V,50HZ
إجمالي الطاقة11KW
الهواء المضغوط0.6~0.8MP
استهلاك الهواء5~20L/min
وزن750kg
Vacuum pumping volume15 L/min
Vacuum level-0.08  Mpa
Facial Mask Cartoner ZHJ 100B
  • س

    ما هي أعمال الصيانة الروتينية التي يجب القيام بها؟

    قم بتزييت الأجزاء المتحركة بانتظام (مثل الكامات والسلاسل). نظّف المستشعرات الضوئية وأكواب التفريغ. افحص تآكل الأجزاء المتآكلة (مثل قضبان الدفع والألواح القابلة للطي).
  • س

    هل يدعم الجهاز جمع البيانات آليا؟

    يمكن دمج معظم المعدات الحديثة مع نظام MES لتسجيل البيانات مثل وقت الإنتاج ووقت الفشل في الوقت الفعلي.
  • س

    هل يمكن لآلة التغليف أن تكون متوافقة مع الصناديق ذات الأحجام المختلفة؟

    تدعم بعض النماذج التغيير السريع في الإنتاج (عن طريق تغيير القوالب أو ضبط معلمات المؤازرة)، ولكن أنواع الصناديق ذات الاختلافات الكبيرة قد تتطلب معدات مخصصة.
  • س

    ما هي الأجزاء الأكثر عرضة للتلف؟ ما هي مدة دورة الاستبدال؟

    كوب شفط (من ٣ إلى ٦ أشهر، حسب تكرار الاستخدام). لوح قابل للطي، قضيب دفع (من ٦ إلى ١٢ شهرًا). حزام/سلسلة (من سنة إلى سنتين).